DATAPOINT presents information on a specific Equipment Application and Industry Segment each month prepared by Carol Turner, Power Systems Research Senior Analyst, Global Operations. Industry trends and equipment specifications are provided. Data comes from PSR proprietary databases, OE Link™ and EnginLink™
274,253 units is the estimate by Power Systems Research of the number of Snowblowers expected to be produced in North America during 2026.
A Snow Blower or snow thrower is a machine for removing snow from an area such as a driveway, sidewalk, roadway, railroad track, ice rink, or runway. It can use either electric power (line power or battery), or a gasoline or diesel engine to throw snow to another location or into a truck to be hauled away.
Snow blowers range from the very small, capable of removing only a few inches (a few more cm) of light snow in an 18 to 20 in (457 to 508 mm) path, to the very large units, mounted on heavy-duty winter service vehicles and capable of moving 20-foot (6.10 m) wide swaths of heavy snow up to 6 feet (1.83 m) deep.
80,800 units is the estimate by Power Systems Research of the number of Ag Tractors expected to be produced in North America (United States, Canada, and Mexico) during 2026.
This product information comes from industry interviews and from two proprietary databases maintained by Power Systems Research: EnginLink™ , which provides information on engines, and OE Link™, a database of equipment manufacturers.
2-Wheel Drive Tractors are farm tractors that have a drive train that allows two wheels to receive power from the engine simultaneously. Normally, the rear axle is powered by the engine.
4WD Articulated Ag Tractors are farm tractors built with an articulated chassis very similar to the design used for articulated wheel loaders. Each element of the articulated chassis has a rigid drive axle, and the front and rear elements are connected by a pivoting/ articulating joint. This design uses rigid (i.e. non-steering) drive axles and is typically used for large, high-HP tractors.
MFWD Tractors (Mechanical Front Wheel Drive) are farm tractors which feature a rigid chassis with steerable front-drive axles. This designation applies to both full-time 4WD and front-assist-drive configuration tractors across a broad HP range. Both configurations are produced in significantly greater volume than the 4WD Articulated type tractors.
Tracked Ag Tractors are steerable multitrack tractors with powered rubber tracks instead of wheels to move the vehicle. The crawler-type tracks are flexible and reinforced with steel. They are usually powered by hydrostatic or completely hydraulic driving mechanisms. They can be articulated or nonarticulated.
Trends. In 2025, production of Ag Tractors in North America decreased 6.2%. Production is expected to drop by nearly 6% in 2026.
Prior declines in 2020 were attributed to COVID-19 related issues which included unusually high orders for materials and parts. Inventory levels are at the lowest level in decades and have left the supply chain a mess, according to leading tractor manufacturers and AEM.
Production of machinery and components needed to build equipment has been halted. This negatively affected demand for farm machinery and contributed to overall lower sales and profits for agricultural equipment operations.
New tractors have become very expensive and have weakened demand. Reduced demand also has been linked to lower commodity prices.
The peak of Ag Tractor production was in 2013. Expect production to remain flat with a potential 10% decline by 2035. PSR
Carol Turner is Senior Analyst, Global Operations, for Power Systems Research
1,300 units is the estimate by Power Systems Research of the number of Golf Cars expected to be produced in North America during 2026.
Dumpers/Tenders are vehicles designed for carrying bulk material, often on building sites. Dumpers are distinguished from dump trucks by configuration: a dumper is usually an open 4-wheeled vehicle with the load skip in front of the driver, while a dump truck has its cab in front of the load.
4,600 units is the estimate by Power Systems Research of the number of Combines expected to be produced in North America during 2025.
A Combine is a farm machine that harvests grain crops. Combines can reap, thresh and winnow crops into a single process. Crops include wheat, oats, rye, barley, corn, etc.
This product information comes from industry interviews and from two proprietary databases maintained by Power Systems Research: EnginLink™, which provides information on engines, and OE Link™, a database of equipment manufacturers. PSR
For details, download the complete report above.
Carol Turner is Senior Analyst, Global Operationsfor Power Systems Research
684,000 units is the estimate by Power Systems Research of the number of Outboard Engines expected to be produced worldwide in 2025.
An Outboard Motor is a propulsion unit for boats consisting of a self-contained unit that includes engine, gearbox and propeller or jet drive, designed to be affixed to the outside of the transom.
This product information comes from industry interviews and from two proprietary databases maintained by Power Systems Research: EnginLink™ , which provides information on engines, and OE Link™, a database of equipment manufacturers. PSR
For details, download the complete report above.
Carol Turner is Senior Analyst, Global Operations, for Power Systems Research
Dumpers/Tenders are vehicles designed for carrying bulk material, often on building sites. Dumpers are distinguished from dump trucks by configuration: a dumper is usually an open 4-wheeled vehicle with the load skip in front of the driver, while a dump truck has its cab in front of the load.
Utility style models are versatile and are extremely popular with homeowners. Dumper/Tenders, commonly referred to as the Power Buggy, are sought after pieces of equipment, much faster than a conventional wheelbarrow and can accelerate job site related activities.
This product information comes from industry interviews and from two proprietary databases maintained by Power Systems Research: EnginLink™ , which provides information on engines, and OE Link™, a database of equipment manufacturers. PSR
For details, download the complete report above.
Carol Turner is Senior Analyst, Global Operations, at Power Systems Resources
A Combine is a farm machine that harvests grain crops. Combines can reap, thresh and winrow crops into a single process. Crops include wheat, oats, rye, barley, corn, etc. Combines overall boost crop output and farm income.
This product information comes from industry interviews and from two proprietary databases maintained by Power Systems Research: EnginLink™ , which provides information on engines, and OE Link™, a database of equipment manufacturers. PSR
Carol Turner is Senior Analyst, Global Operations, at Power Systems Research
Pedestal Cranes. This equipment is used on projects that are stationary or where mobility needs are small; they offer the perfect combination of powerful performance, durability and cost effectiveness.
Self-Propelled Cranes This is a mobile crane which is a self-propelled vehicle, one that is designed for lifting objects using a boom with lifting gear. It only carries loads that are necessary for its own propulsion or equipment.
This product information comes from industry interviews and from two proprietary databases maintained by Power Systems Research: EnginLink™ , which provides information on engines, and OE Link™, a database of equipment manufacturers. PSR
Carol Turner is Senior Analyst, Global Operations, at Power Systems Research
A Light Plant, also known as a Light Tower, is a piece of mobile equipment which has one or more high-intensity lamps mounted on a mast. The mast is attached to a trailer, with a generator to power the lamps. The generator is powered by a diesel engine. Light plants mostly are used for construction and mining projects.
This product information comes from industry interviews and from two proprietary databases maintained by Power Systems Research: EnginLink™ , which provides information on engines, and OE Link™, a database of equipment manufacturers. PSR
Carol Turner is Senior Analyst, Global Operations, for Power Systems Research
Jet Drive Boats are boats propelled by a jet of water ejected from the back of the craft; they have no propeller and can maneuver in shallow water. PWCs are also driven by jet water and come in several styles: Stand-Ups or Sit-Downs. They are often referred to as jet skis. Sit Downs are designed for one, two or three persons in a sitting position, one in front of the other. PWC Stand-Ups are designed for one rider standing or kneeling on the watercraft.
This product information comes from industry interviews and from two proprietary databases maintained by Power Systems Research: EnginLink™ , which provides information on engines, and OE Link™, a database of equipment manufacturers. PSR
Carol Turner is Senior Analyst, Global Operations, for Power Systems Research
