COVID-19 Update: Europe Slowly Resuming Production

News: Regions

2020-04-25

COVID-19 Update: Europe Slowly Resuming Production

April 21, 2020–After four weeks of lockdown, some European countries are slowly lifting restrictions, allowing industrial production and some commercial operations to restart, and restoring some freedoms to their citizens.  

Emiliano Marzoli
Emiliano Marzoli

In Italy, this week represents a key moment as some industries can resume production.  Agricultural and Lawn&Garden OEMs can reopen their factories, although respecting strict regulations that will reduce factory capacity.  The same is happening in Spain starting April 13, with all segments resuming work, but with differences across regions.  Moreover, many OEMs were not able to meet the new working regulations and could not resume production.

Read More»

DataPoint: 2020 Production Estimate, NA Skid Steer Loaders

105,900 units is the estimate by Power Systems Research of the number of Skid Steer Loaders to be produced in North America (Canada and the United States) in 2020.

This information comes from industry interviews and from two proprietary databases maintained by Power Systems Research: EnginLink™ , which provides information on engines, and OE Link™, a database of equipment manufacturers.

Read More»

2020-04-24

Outdoor Recreation Group Creates COVID-19 Guide

The Outdoor Recreation Roundtable (ORR), a coalition of outdoor recreation trade associations and organizations, has published on their web site (www.recreationalroundtable .org) a guide for their members on the Outdoor Recreation Industry and the Coronavirus. Included on the site are Federal, State and Industry Resources, ORR’s letter to the President, Governors and Federal Government on the impact and recommendations to the Coronavirus crisis.

The site also has suggestions on what small businesses and policy makers can do to support efforts to combat the virus. The link for the informational site at ORR is: https://recreationroundtable.org/coronavirus/

PSR can support members of many of these organizations with focused and accurate forecasts of global diesel and gas engine production.  PSR


Michael Aistrup is a Senior Analyst

2020-04-14

STA Uses 3D Printers To Produce Face Shields for Health Care Workers

MENDOTA HEIGHTS, MN–Students at St. Thomas Academy High School in suburban Minneapolis, Minnesota, are using 3D printers in their Innovation Center to produce face shields for first responders and medical personnel who are battling the coronavirus.

The school has garnered some national exposure for the manufacturing work it has done with its 3D printers, including time on an ABC News broadcast and a nice article in the St. Paul (Minnesota) Pioneer Press newspaper.

Power Systems Research is a co-founder of the Innovation Center that’s part of the company’s effort to support STEM (Science, Technology, Engineering and Math) programs at local high schools.

Read More»

2020-04-08

Coronavirus Has Major Impact on Global Production of Off-Highway Equipment and Medium & Heavy-Duty Vehicles

Download Your PDF Copy of the Presentation

ST. PAUL, MN–A team of international analysts from Power Systems Research (PSR) analyzed the impact of COVID-19 on the global production of Off-Highway Equipment and MH-Duty Vehicles in several regions today.

The team examined the impact of the coronavirus in North America, Europe, Asia, India, and South America for the remainder of 2020 and into Q1 2021.  Download your copy of the presentation here.

Read More»

2020-04-01

CONEXPO Batteries Are Coming. We Saw Lots of Them at CONEXPO and GIE+Expo

Recently I was at a dinner with visiting members of my family discussing the noble transition that many manufacturers are making from producing their typical goods to producing essential goods and equipment for the coronavirus fight.

Tyler Wiegert
Tyler Wiegert

One that came up was Tesla’s transition to making ventilators, and one member of my family began to say that they wouldn’t want a Tesla ventilator if they were hospitalized, because it would probably catch fire and explode.

My fiance is in medicine rather than in our industry, so she took that to be a serious comment about the risk of ventilators sparking in an oxygen-rich environment. But it quickly became clear that this critic just has a deep and abiding skepticism of battery technology, because they repeatedly brought the conversation back to battery fires and cars exploding, despite there having been only 14 reported cases of Tesla vehicles catching fire between 2013 and 2019, with most of those happening after accidents.

Read More»

2020-03-30

Dealing With Coronavirus

At Power Systems Research our business is based on being informed: Globally, and in several important industry segments.

Even as the coronavirus affects markets and industries and companies worldwide, we’re continuing to work effectively for our clients. We’re adjusting our operations hourly to meet the changing needs caused by coronavirus. Our IT staff has adapted PSR systems so our analysts around the world can work at home and communicate easily and effectively with each other and with the home office.

Read More»

2020-03-23

Komatsu Launches SMARTCONSTRUCTION Retrofit Kit

This article appeared in the March 2020 issue of PowerTALK™ News

March 23, 2020–Komatsu has launched the SMARTCONSTRUCTION Retrofit kit, the add-on kit to offer ICT capabilities, such as 3D machine guidance and payload measurement, to conventional construction equipment in Japan in late April through LANDLOG Ltd.

Akihiro Komuro
Akihito Komuro

Conventional construction equipment with no ICT capabilities account for over 98% of all construction equipment working on construction sites in Japan. When the SMARTCONSTRUCTION Retrofit kit is added to conventional equipment, it will enable the equipment to use ICT functions, such as 3D machine guidance and payload measurement, about on par with ICT-intensive equipment.

Read More»

RUSSIA REPORT, March 2020

This report includes updates on these manufacturers: Haval, Claas, Aurus, and KAMAZ.

Haval To Build Engine Plant in Russia

This article first appeared in the March 2020 issue of PowerTALK™ News

Haval, the Chinese manufacturer, said it plans to build its own engine plant in the Tula region of Russia. Work is scheduled start this month (March 2020). The planned investment in the project is US$ 270 million. This information comes from press-service of Haval Motor Rus.

Maxim Sakov
Maxim Sakov

It’s expected that the new plant will produce 80,000 engines annually, increasing the localization level of SUVs by several thousand units annually. Total personnel number in automotive plant exceeds 1000 people.    Read The Article

PSR Analysis: The first Russian Haval plant opened in May of 2019. Current production capacity is 80 Haval SUVs. The plant will be located on a 10,000 sq.m. site next to the Haval automotive plant. It will provide more than 300 jobs.

Claas is Shifts Production of Tucano 320 Harvester To Russia.

In April 2020, Russian plant Claas in Krasnodar will start producing the Tucano 320 grain combine. During the first two years, this model will be produced simultaneously in Germany and in Russia. Beginning in 2022, the plant in Krasnodar will became the sole maker for this model. The move opens opportunities to increase production and export volumes for the Russian plant.

Read More»

INDIA REPORT, March 2020

Coronavirus Reduces India Auto Components

This article first appeared in the March 2020 issue of PowerTALK™ News

China is one of the leading suppliers of auto components to India, and this supply chain was significantly interrupted in Q1 2020 by the caronavirus. In 2018-19, components worth an estimated US$4.5 billion (out of a total of approximately $17 billion) were exported from China to India. Most of this trade is in electronic components, EGR modules, fuel injection pumps, turbochargers, meter sets, LEDs, magnets, airbag components, and steering system components.

Since the discovery of the Coronavirus in December 2019, this supply chain has been affected. The covid-19 pandemic has started taking a toll on components supply and automotive production in India. The situation is further amplified, as China has terminated all sea routes to other parts of the world.

Read More»