New restrictions for imports of right-wheel engines to Russia became effective July 1. Completely barred from import are machines of the M2 and M3 class – trucks, buses, LCVs and construction machines.
Maxim Sakov
On top of this, the procedure of Custom’s clearance of right-wheel passenger cars became more complicated. The owner of such car should obtain technical certificate, confirming compliance of car design to the safety requirement.
According to the Federal Customs Service, the amount of payments will depend on ecological class, production date, engine volume and other parameters. This will include processing fee, custom’s tax and utilization fee. Read The Article
During the past few months, we have seen significant changes in the bus market in Europe and North America as operations convert from internal combustion engines to zero-emission buses.
In Europe, Scania and Volvo are moving from building complete buses to a chassis only build. The high cost of zero-emission buses and a competitive market are primary reasons for this. The expected growth of zero-emission buses is forcing the OEMs to better streamline operations, and we expect to see other large OEMs transition down this path.
Data released by Anfavea about July Sales and Production show only 29% of the trucks sold in 2023, and produced during the year, met the PROCONVE P8 / Euro VI emissions regulation.
From January to July 2023, 53,900 trucks were produced, 36.2% below the 84,500 units produced in same period last year. This amount is also lower than that produced in the same period in 2021, when 89,500 trucks were produced on the Brazilian OEM assembly lines.
Truck production is still at a slow pace as the market continues to generate low demand for the new PROCONVE P8 technology.
Natasa Mulahalilovic is PSR MarineLink Product Manager
Emiliano Marzoli is Senior Business Development Manager – Europe
Dalibor Sablic is Senior Business Development Manager – Europe
SUMMARY: The general mood at Boot 2020 this year was very positive. Most builders said they had a very successful nautical 2018/2019 year, and most said they are looking forward to a good year in 2020. The show drew 240,000 visitors who had an opportunity to meet 1,900 exhibitors from 71 countries.
The Sailing boats segment is coming back on track, motorboats of all sizes are doing well, the super yachts segment remains strong, and inflatable boats and tenders have gained in popularity. The optimistic view for 2020 is based on good year-end results, continuous investments in new technologies, materials, equipment, design and exciting new boat concepts.
Natasa Mulahalilovic
Modern designs, completely new looks, use of light and solid material, work on multi-functionality and openness of the boats is visible everywhere and in all segments. Boats are open more than ever, providing more space and light, and bringing riders closer to the water.
The environmental awareness is growing, and a new generation of boaters is looking for cleaner solutions, not just comfort. That’s why the sailing segment is gaining ground, electric boats are appealing to the general curiosity, and small and medium motorboats are more attractive than in last 10 years when the trend was towards bigger motor yachts and super yachts.
17 Halls of Boats, Boats and More Boats
Duesseldorf, Germany–The Power Systems Research (PSR) team spent several days exploring the 17 halls at this year’s Boot 2020 Show, reviewing products and talking with pleasure boat builders, traders and other industry professionals about the latest achievements, innovations and trends.
The 51st edition of Boot 2020, Europe’s largest boat show, wrapped up January 26, after drawing attendance of 240,000 for the nine-day event. People came mainly from Europe, but they came from all over the world, as well.
The CTT Bauma trade show is main event of construction industry in Russia. Since 2017 it’s owned and operated by Messe Munich. The show was conducted this year in Moscow May 25-28 in its usual place, the Crocus Expocenter. Last year, the fair was off because of the COVID pandemic, but this year we saw that both the exhibition and construction industries are showing a growing trend. The fair’s indoor exposition was restored to three pavilions, and the outdoor exposition also grew in size versus 2019. There were 351 exhibitors from 17 countries, somewhat better than last time. A total of 184 brands were represented.
Here is, however, one unpleasant factor. Most of the international OEMs did not participate in the fair this time. Wirtgen, Volvo, Cummins, Caterpillar, Ammann, Hyundai, Renault, Komatsu machines were missing from this fair. John Deere, Doosan, Kato, and some other brands were limited, having only small booths, set by the local dealers. Many Russian machine makers, who usually participate in the fair, also ignored the event. Among them – GAZ, Chetra, DST-10, Chelyabinsk Tractor Plant, YAMZ.
HANNOVER, Germany–For many years, Agritechnica has been growing and strengthening its role as the top European agricultural trade show. Despite the struggles that the industry is facing, with declining order books and a less than enthusiastic outlook for 2020, Agritechnica 2019 held here Nov. 11-16, 2019, reaffirmed its position as the most important ag tech event in Europe. The show reported 2,820 exhibitors and 450,000 visitors, more than 130,000 of them from outside Germany.
The global marine inboard engines market is expected to grow from $2.75 billion in 2022 to $4.45 billion by 2032 at a CAGR of 5.1%, according to forecasts by Power Systems Research.
A marine inboard engine is a reciprocating engine mounted within a boat’s hull. It is a four-stroke engine that has been modified for maritime usage. The engine spins a drive shaft that passes through the hull and is connected to a propeller. While outboard engines must be periodically serviced to ensure they remain watertight, inboard engines typically do not require much maintenance. Additionally, inboard engines tend to be more fuel-efficient than outboards.
Walking CONEXPO 2023, the giant international construction show in Las Vegas this month, it was obvious that OEMs are devoting huge amounts of resources to developing alternative power sources for their compact equipment.
Hydrogen powered units and battery packs were common and new products powered by alternative energy sources were popular with attendees. New technology was the name of the game at this year’s show.
However, there were several prototypes that were built only for the show, according to some exhibitors, and were not likely to be put into mass production anytime soon. In fact, one manufacturer told us, “This was manufactured for the purpose of the exhibition and is not intended for mass production.”
This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Performance cookies are used to adjust the rate of analytic and advertisement tracking (if enabled) to avoid slowing our site down during high traffic times.
Cookies used to track your Internet use and tailor advertisements to your interests and provide the ability to share and like pages on our site with your friends on social media.
Functional cookies help to perform certain functionalities like sharing the content of the website on social media platforms, collect feedbacks, and other third-party features.
