The PowerLink 3.0 application has been updated for Q4 2025 and you can now access the system.
Contact support@powersys.com if you have any questions or concerns. PowerLink™ 3.0 Login
LAS VEGAS—Power Systems Research (PSR) sent a team of analysts to the CONEXPO-CON/AGG 2026 Show to talk with exhibitors and about the state of the industry and to learn more about new products.
You can read their impressions of the show, their takeaways from talking withexhibitors and attendees about the state of the industry, and the information they gathered about innovative new products.
Interestingly, the PSR team didn’t see big movement to battery power. They saw more hybrids and hydrogen power moving forward. Battery seemed to be relegated to smaller machines.
LAS VEGAS—Many visitors to the CONEXPO-CON/AGG 2026 show here March 3-7 arrived from the cold and snowy Midwest and East Coast. The show exhibit areas covered 2.9 million square feet; with some of the exhibit areas being outdoors attendees felt the warmer than normal temps this time of year where Las Vegas had a record temperature of 86F on March 1. Those warmer temperatures lingered throughout the week.
This year’s show at the Las Vegas Convention Center drew an estimated 2,000 exhibitors and while attendance figures were not available as we prepared this report, observers said traffic was very heavy and attendance was expected to surpass the record 139,100 figure set at the last show in 2023.
We talked with many industry representatives at CONEXPO, and we generally heard that the North American construction equipment market is performing relatively well and that it is expected to experience low single-digit growth in the near term, with demand remaining stable. Demand continues to be supported by infrastructure investment and ongoing construction activity.
OEM representatives said their cautious forecasts were affected by factors such as interest rates, inflation, tariffs and global supply chain disruptions.
Tariffs were repeatedly mentioned as one of the main uncertainties affecting the industry. Frequent policy changes are impacting equipment pricing, sourcing strategies, and global supply chains. Manufacturers are adjusting sourcing strategies and regional production to mitigate tariff exposure.
The industry is moving toward a dual technology pathway. Electrification continues emerging in compact equipment and adoption is increasing slowly as customers become more familiar with EV solutions. Advanced diesel engines remain dominant in medium and large machines, and according to experts, diesel will remain the dominant technology for a long time.
OEMs said they are investing heavily in new engine platforms, efficiency improvements, telematics and connectivity.
We were able to identify a number of trends, based on field interviews and observations conducted during OEM and engine manufacturer booth visits.
Powertrain, Engine Technology Trends
Diesel engines remain the dominant power solution for medium and large construction equipment. Large equipment used in remote areas still requires internal combustion engines due to power needs and operational constraints. According to interviews made by PSR, diesel will continue to be the preferred power solution.
Manufacturers continue to improve fuel efficiency, simplify engine architecture, and enhance durability. Manufacturers showcased different alternative power solutions and are still exploring and testing hydrogen combustion engines, hybrid systems, and introducing multi-fuel platforms (hydrogenated vegetable oil, hydrogen, biodiesel, and natural gas) to the market.
Several companies presented prototype hydrogen engine concepts, although these technologies remain in testing phases or with some few customers. One of the key operational challenges for hydrogen equipment is the lack of fueling infrastructure. As an example, Power Systems Research analysts interviewed executives of JCB, and the company explained that its hydrogen combustion engine technology is already on the field with a limited number of customers, although the market is still at an early stage of deployment.
JCB has developed a mobile hydrogen refueling unit in conjunction with a supplier company that delivers hydrogen directly to job sites, so the fuel logistics is handled as part of a service package supporting early adopters. The main takeaway from the interview is that hydrogen combustion technology is technically viable but still constrained by fueling infrastructure.
Regarding multi-fuel platforms, major manufacturers like Perkins and Cummins showcased engines designed to run on low-carbon fuels, including hydrogen, HVO, and natural gas, aiming to provide flexible, lower-emission solutions without sacrificing performance. Cummins next generation X15, and Perkins 2600 Series were showcased at the venue. FPT showcased it´s multi-fuel XCursor 13. Isuzu also presented it´s multi-fuel engine concepts based on its established engine architecture.
Electrification Trends
Compact equipment segments show the highest experimentation with electrification and alternative power solutions, while large machines such as dozers and large excavators continue to rely primarily on diesel power due to high energy requirements.
Electrification is primarily being applied to compact equipment used in urban environments, as well as in some remote applications supported by portable power stations or battery storage units.
Battery-electric prototypes and electric power units were showcased, with some already available in the market and others currently being tested as potential replacements for diesel engines in smaller and medium-sized equipment.
There is a growing trend toward presenting these technologies, and several new models were introduced during the show by different OEMs and engine manufacturers. Examples include the Perkins battery-electric power unit, the Komatsu electric micro excavator PC01E-2 made in Japan, the JLG scissor lift ES1930M Micro-Sized, the mini track loader TL100EV from Case, and the Dynapac CC1000e electric vibratory roller.
Charging infrastructure and operational limitations continue to restrict wider adoption of electric equipment across the broader construction equipment market.
Additional technologies presented included autonomous and robotic equipment, such as the RogueX3, Bobcats third-generation autonomous compact loader concept. This machine was introduced to explore the future of compact construction equipment through electrification, autonomy, and modular machine architecture.
OEM & Engine Manufacturer Highlights
While walking the CONEXPO, we saw several interesting engine platforms and alternative power technologies at engine manufacturer booths. Interestingly, a number of the innovative products were diesel powered.
Diesel Engines
Manufacturer
Engine Model
Displacement
Power
Notes
Cummins
F3.8 Power Unit
3.8 L
74–173 hp
Modular power unit for off‑highway equipment
Cummins
X15 Next Generation
~15 L
Up to ~700 hp
Heavy‑duty multi-fuel engine platform
Perkins
904J‑E36TA
3.6 L
~134 hp
High power density compact diesel engine
Perkins
2606J‑E13TA
~13 L
~690 hp
Large industrial diesel engine platform and multi-fuel
Boot Düsseldorf 2026 welcomed more than 200,000 visitors over nine days (Jan. 17-25) and hosted about 1,500 exhibitors from 120 countries. The show was about the same size as that of the 2025 event, but last year’s show drew exhibitors from only about 67 countries.
Boot once again confirmed its position as the world’s leading indoor boat show. The event covered the entire spectrum of the marine industry, including motorboats, yachts and superyachts, catamarans, sailing boats, outboard and electric boats, engines, power generation systems, equipment and components, as well as touristic services, charter companies, and boating clubs.
Boot Düsseldorf 2026 welcomed more than 200,000 visitors over nine days (Jan. 17-25) and hosted about 1,500 exhibitors from 120 countries. The show was about the same size as that of the 2025 event, but last year’s show drew exhibitors from only about 67 countries.
Boot once again confirmed its position as the world’s leading indoor boat show. The event covered the entire spectrum of the marine industry, including motorboats, yachts and superyachts, catamarans, sailing boats, outboard and electric boats, engines, power generation systems, equipment and components, as well as touristic services, charter companies, and boating clubs.
The Agritechnica 2025 trade show, held under the guiding theme “Touch Smart Efficiency,” cemented the industry’s focus on integrating digital intelligence with advanced hardware to achieve higher yields while ensuring environmental and economic sustainability. The primary trend was the transition of alternative power and robotics from concepts into commercially available, high-performance machinery.
The 2025 show was bigger than the previous show in 2023–there were more attendees (476,000 vs. 470,000) and exhibitors (2849 vs 2812) and more countries represented (171 vs. 149). The total space for the two shows was the same–394,000 sq in 24 halls at the Hanover Exhibition Center in Hanover, Germany. The bi-annual show ran Nov. 9-15.
Key New Models and Technology Unveiled Manufacturers focused heavily on hybridization, automation, and engine efficiency:
No other boat has pushed the boundaries of green yachting as far as the MODX 70, winner of the 2025 Multihull of the Year award for its advanced, intelligent vision of zero-carbon sailing, announced at the Cannes Yachting Festival.
The concept was introduced in 2008 and finally brought to life in 2025 through the combined efforts of Ocean Development, VPLP Design, Aeroforce, MG Energy, Madden Tech, and many other visionary partners.
The project has earned recognition from the French government under the France 2030 Plan, receiving support through the i-Nov competition for sustainable and intelligent mobility in 2021, which helped fund the ambitious and costly development.
The Bauma CHINA 2024 trade show, held at the Shanghai New International Expo Centre from November 26-29, showcased a significant evolution in the global construction machinery industry. The event expanded to 330,000 square meters, featuring 3,542 exhibitors from 32 countries and attracting 281,488 visitors from 188 nations, a remarkable recovery from the pandemic-impacted 2020 edition.
This year’s exhibition highlighted trends such as electrification, sustainable technologies, digital innovations, and intelligent system integration. Chinese manufacturers like Dingli, LGMG, and Sinoboom demonstrated dominance, presenting groundbreaking products in new energy and hybrid solutions, while the presence of Western manufacturers was notably reduced.
For more information on the marine market, visit MarineLink, the Power Systems Research proprietary marine products database.
More than 600 exhibitors from the marine pleasure industry showed off their latest models of boats, yachts, marine equipment and other products and services at the 47th annual Cannes Yachting Festival, Europe’s biggest in-water event, just closed its doors. The event ran Sept. 10-15.
An estimated 50,000 visitors attended the festival and got an excellent note for organization from all participants and visitors. The next year’s edition will be held Sept. 9-14, 2025.
The electric marine market has been very dynamic in the last 10 years and electric products and accessories were very popular at the show. Investments in research and development of new technologies and their implementation into boats have been extremely high.
PARIS—The 2024 edition of INTERMAT, the International Exhibition for Construction and Infrastructure, is coming up soon. The four-day show will be held at the Paris Nord Villepinte Exhibition Center 30 minutes from Paris April 24-27, and Power Systems Research will be there.
INTERMAT is a leading trade show that brings together close to 1,000 industry exhibitors from the construction and infrastructure sectors worldwide. It showcases the latest equipment, materials, innovations, and technologies in the global construction industry.
PSR team members will attend INTERMAT to gather information from exhibitors and attendees on the newest products and industry trends.
If you would like to meet with us at the show, please contact us to schedule a meeting.
CONEXPO – Summary Report 
