Eletra started converting Trucks and Buses from 3.5 to 54 Tons for the range of 50km to 150km by replacing the actual Powertrain (ICE, Transmission, Axels,) and suspension with batteries, electric drive and new suspension. The main benefits for the approach is to provide 30% less cost than a new Electric Truck and shorten the timing to meet sustainability targets, since the retrofit is done quickly. Companies like Ambev (AB-Inbev) announced 102 trucks retrofitted with Eletra.
The amount is expected to be directed mainly to new technologies, such as for the Proconve P8 introduction in 2023, new technologies for Connectivity and development of sales and aftersales areas.
PSR Analysis: The investment is higher than the former investments cycles but keeps the same line and makes the company one of the most important players in the Truck and Bus industry in South America. With this announcement, VWCO confirms its belief in the Brazilian Market and indicates its willingness to keep its market share lead. PSR
Fabio Ferraresi is Director, Business Development South America, for Power Systems Research
The Brazil trailer industry registered 163,000 new license plates in 2021 vs. 122,000 in 2020, growing 33.5%. The result could have been even better since the segment was affected by a lack of components, such as steel, tires, etc. Export sales climbed to 4,600 units vs. 2,100 units in 2021.
PSR Analysis: The growth is in line with truck sales that confirm the health of the transportation industry. The growth of exports confirms the recovery of key markets of Trailers and MHV.
Fabio Ferraresi is Director Business Development-South AmericaforPowerSystems Research
Electrification has become one of the important directions of green development within China’s construction machinery segment. Domestic construction machinery leaders have increased the development of equipment electrification and have launched a variety of electrification products.
Some professional organizations predict that by 2025 the penetration rate of main products may reach 25%. The electrification of construction machinery initially replaces conventional diesel engine drive with electric drive and then the hydraulic device is replaced by an electric device. Concrete mixers, truck cranes, muck trucks, excavators and wheel-loaders are the most easily electrically driven products, especially for small construction machinery.
The Fund of Industrial Development has approved a loan of US$ 27 million (2 Bln rubles) under the “Priority Projects” program, which will allow Ural to build axles at a new production facility. The new site will allow OEM to double production of heavy load trucks and to create about 4,000 jobs.
Currently, these axles are being purchased in China. Ural is going to make this product for its own use, and for sale to other truck makers. Production under the program is expected to begin in 2023.
The Brazil Government has published a law starting the Truck and Buses Scrappage Policy, aiming to renew fleets, increase productivity and efficiency, reduce emissions and improve safety. Depending on the effectiveness of the program, it may affect the MHV market. See complete article translated in our webpage and the original from Automotive Business.
PSR Analysis: The launch of the Renovar program is a positive sign on the path of improving safety, logistics efficiency and environmental impact for Brazil, with genuine and relevant objectives.
Because it is a voluntary program, operating in phases, with regulations and parameters yet to be defined, it is too early to project the effectiveness and impact on the vehicle market.
We believe that Brazil still needs broader legislation for a long-term program with a gradual and geographically differentiated process to restrict the movement of older, less safe trucks and buses with lower efficiency and higher emission levels. Fleet owners, autonomous carriers, OEMs and the entire production chain need predictability for long-term planning to prepare for and assure feasibility for a broad and scheduled fleet renewal. PSR
By Fabio Ferraresi, Director Business Development South America, for Power Systems Research
“By 2025, the national gas storage capacity of intensive layout will reach 55 billion ~ 60 billion cubic meters, accounting for about 13% of natural gas consumption. Build a green and low-carbon transportation system, optimize and adjust the transportation structure, vigorously develop multi-modal transport, promote the medium and long-distance transportation of bulk goods “from rail to water”, encourage the use of clean fuels such as LNG in the field of heavy-duty trucks and ships, and strengthen the guarantee of clean energy supply in the transportation industry. It is emphasized that the LNG storage and transportation system in Bohai Rim region, Yangtze River Delta region and Guangdong Hong Kong Macao Bay area should be continuously improved, and the core is the construction of LNG terminal.”
PSRAnalysis. China’s LNG import volume in 2022 is expected to surpass Japan and become the world’s largest LNG importer. At the same time, China has built 22 LNG terminals. There are more than 200 LNG manufacturers in China, with an annual capacity of about 30 million tons.
Hino Motors has announced that the falsification of diesel engine emission values, which was previously announced in March, had been taking place since at least 2003 or earlier. The company had previously stated that the fraud began in the fall of 2016. In 2016, the company also revealed that it had falsely reported to the MLIT (Ministry of Land, Infrastructure, Transport, and Tourism) in response to its request for a fact-finding survey on exhaust gas and fuel efficiency tests.
PSR Analysis: Although I do not wish to make such negativity a theme, I cannot overlook this issue. The impact on the industry of the fraud at Hino, which has the top share of the medium- and heavy-duty truck sector in Japan, is significant. Isuzu has suspended shipments of four bus models that use Hino engines. Not limited to the automotive field, Tadano cranes, Kobelco hydraulic excavators, Hitachi Construction Machinery wheel loaders, and Kato rough terrain cranes have also been forced to suspend shipments after the problem came to light.
Navistar says it plans to introduce the Navistar 12.7 liter S13 engine platform in the fourth quarter of 2023. The S13 engine is based upon the Scania DC13 engine and will supersede the current 12.4 liter A26 engine platform starting next year. The initial engine installations will be standard on the LT and RH truck platforms and will be introduced to the HV and HX platforms in 2024. The order books are expected to open in October.
The S13 engine will be paired with the new International T14 automated manual transmission. The T14 is a 14 speed AMT which is the first transmission offered by the company.
The current A26 engine platform is based upon the MAN D26 engine platform and will be superseded by the S13 engine over the next few years. Navistar will continue to source the Cummins engine lineup for the foreseeable future. According to Navistar, this will be the last engine upgrade for the company as they plan to focus on zero-emission vehicles. Navistar says that half of all its new vehicles sold by 2030 will be zero-emission; it expects to reach 100% of sales in 2040. PSR
A favorable mix of factors is propelling demand for commercial vehicles to their best-ever pre-covid-19 volumes in India. Even though the CV segment has not reached its 2018 peak, it is expected to grow by double digits in the current fiscal year.
This growth is based on healthy demand and a relatively low base last year. While the sales are in green for all the major OEMs, market leader Tata Motors has reported year-over-year drop of 3%.
This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Performance cookies are used to adjust the rate of analytic and advertisement tracking (if enabled) to avoid slowing our site down during high traffic times.
Cookies used to track your Internet use and tailor advertisements to your interests and provide the ability to share and like pages on our site with your friends on social media.
Functional cookies help to perform certain functionalities like sharing the content of the website on social media platforms, collect feedbacks, and other third-party features.
