The PowerLink 3.0 application has been updated for Q1 2024 and you can now access the system.
Contact support@powersys.com if you have any questions or concerns. PowerLink™ 3.0 Login
PSMA Rus plant, located in Kaluga, Russia, has made first testing sample of ned DV6 motor.
First engine was produced in February. Engine production in the plant was set according to obligations for product localization, written in the contract with Russian government.
Turbocharged DV6-EL engines have 1,6-liter volume. They will be set to LCV models, produced on Kaluga’s plant.
PSMA plant in Kaluga makes Peugeot, Citroen, Mitsubishi cars for Russian market. The production started in 2010.
PSR Analysis. If the project succeeds, it will be smallest mass produced diesel engine in Russia. Whereas EU countries are trying to cut off diesel powertrain production, Russia invites it into the country. PSR
Researchers from the University of California, Berkeley, and Lawrence Berkeley National Laboratory have released a study which examines “the technical outlook, economic feasibility, and environmental impact of battery-electric containerships.” By modelling 5 to 10 GWh electrified containerships, they found that 40% of routes today could be electrified in an economically viable manner, before considering environmental costs.
Using only technology available for purchase today, nearly all ships with routes shorter than 2,000 kilometres are economically advantageous, and ships with routes as long as 3,000km are economically viable.
PSR Analysis: Ships transport more than 10 billion metric tons of cargo each year, including clothing, electronics, and oil, and almost all of these ships run on fossil fuels, so they emit a lot of carbon pollution. Maritime shipping causes about 3% of global greenhouse gas emissions. As the costs of large ICE containerships continue to rise electrified containerships become increasingly cost effective. Electrified containerships are 80% more efficient than their ICE counterparts, and use 30% less energy overall. PSR
Guy Youngs is Forecast & Adoption LeadAnalyst at Power Systems Research
During the past few months, we have seen significant changes in the bus market in Europe and North America as operations convert from internal combustion engines to zero-emission buses.
In Europe, Scania and Volvo are moving from building complete buses to a chassis only build. The high cost of zero-emission buses and a competitive market are primary reasons for this. The expected growth of zero-emission buses is forcing the OEMs to better streamline operations, and we expect to see other large OEMs transition down this path.
Data released by Anfavea about July Sales and Production show only 29% of the trucks sold in 2023, and produced during the year, met the PROCONVE P8 / Euro VI emissions regulation.
From January to July 2023, 53,900 trucks were produced, 36.2% below the 84,500 units produced in same period last year. This amount is also lower than that produced in the same period in 2021, when 89,500 trucks were produced on the Brazilian OEM assembly lines.
Truck production is still at a slow pace as the market continues to generate low demand for the new PROCONVE P8 technology.
Natasa Mulahalilovic is PSR MarineLink Product Manager
Emiliano Marzoli is Senior Business Development Manager – Europe
Dalibor Sablic is Senior Business Development Manager – Europe
SUMMARY: The general mood at Boot 2020 this year was very positive. Most builders said they had a very successful nautical 2018/2019 year, and most said they are looking forward to a good year in 2020. The show drew 240,000 visitors who had an opportunity to meet 1,900 exhibitors from 71 countries.
The Sailing boats segment is coming back on track, motorboats of all sizes are doing well, the super yachts segment remains strong, and inflatable boats and tenders have gained in popularity. The optimistic view for 2020 is based on good year-end results, continuous investments in new technologies, materials, equipment, design and exciting new boat concepts.
Modern designs, completely new looks, use of light and solid material, work on multi-functionality and openness of the boats is visible everywhere and in all segments. Boats are open more than ever, providing more space and light, and bringing riders closer to the water.
The environmental awareness is growing, and a new generation of boaters is looking for cleaner solutions, not just comfort. That’s why the sailing segment is gaining ground, electric boats are appealing to the general curiosity, and small and medium motorboats are more attractive than in last 10 years when the trend was towards bigger motor yachts and super yachts.
17 Halls of Boats, Boats and More Boats
Duesseldorf, Germany–The Power Systems Research (PSR) team spent several days exploring the 17 halls at this year’s Boot 2020 Show, reviewing products and talking with pleasure boat builders, traders and other industry professionals about the latest achievements, innovations and trends.
The 51st edition of Boot 2020, Europe’s largest boat show, wrapped up January 26, after drawing attendance of 240,000 for the nine-day event. People came mainly from Europe, but they came from all over the world, as well.
The global marine inboard engines market is expected to grow from $2.75 billion in 2022 to $4.45 billion by 2032 at a CAGR of 5.1%, according to forecasts by Power Systems Research.
A marine inboard engine is a reciprocating engine mounted within a boat’s hull. It is a four-stroke engine that has been modified for maritime usage. The engine spins a drive shaft that passes through the hull and is connected to a propeller. While outboard engines must be periodically serviced to ensure they remain watertight, inboard engines typically do not require much maintenance. Additionally, inboard engines tend to be more fuel-efficient than outboards.
MOSCOW–The Moscow Boat Show conducted here March 5-9 in the Crocus City Expo center occupied two exhibition halls with total square of 19,000 sq.m., but it was much different in several ways than previous shows.
The number of boats shown was 30% less than during last year’s event. And the organizers of the show left a lot of empty space even in the dedicated halls. This looked strange because often there were only narrow passages between boats.
Surprisingly, more than 50% of the boats at the fair were produced domestically. Jeanneau, Beneteau and some other brands were also here, brought by a local dealer, but in smaller sizes and numbers than last year’s show. Some EU and Turkish shipyards exhibited at the fair, but did not bring anything besides marketing materials.
Daimler Truck and Deutz have entered a strategic partnership to manufacture engines. Under the plan, Daimler Truck acquires 4.19% of the shares in Deutz AG, in return for which Deutz pays for access to Daimler Truck internal combustion engines.
The move is a consequence of Daimler’s decision to stop investing in the development of their medium duty engines (MDEG Series) from 5.1 to 7.7 Litres. At the same time, Deutz will be able to access Daimler technology and further develop it for off-road applications, such as construction and agriculture machinery. The heavy-duty engines will continue to be manufactured by Daimler Truck at the Mercedes-Benz plant in Mannheim and be delivered to Deutz to complete the engine system. Production of the medium-duty engines is expected to take place at Deutz in 2028.
Joe Zirnhelt President and Chief Executive Officer
Joe Zirnhelt is President and Chief Executive Officer of Power Systems Research and a member of the company’s Board of Directors. His responsibilities include management and oversight of the company's operations as well as leading the implementation of strategic initiatives. Joe joined the company as a Senior Consultant in 2005. After several years working in various management roles within product and project oversight, he served as the company’s Chief Operating Officer & Strategist from 2015 until assuming responsibilities as President and Chief Executive Officer in 2019. Over his 24-year professional career he has served as an Officer in the U.S. Navy including training in the Naval Nuclear Propulsion Program followed by experience with Alstom Power, a leading French power plant developer, before joining Power Systems Research in 2005. Joe holds an undergraduate degree in Mechanical Engineering from the University of Notre Dame and an MBA from the University of Texas at Austin. He has been a regular contributor to Diesel Progress magazine and other industry publications often featuring the North American power generation market. He also is actively involved in the Electrical Generating Systems Association (EGSA) where he has contributed content for its Powerline magazine and recently completed his term as Chair of the Market Trends Committee.
Joe Zirnhelt is president and CEO of Power Systems Research, a company that provides global data and intelligence on engines and power equipment. In this podcast, Joe describes components modules and how clients use this information to enhance the power and utility of the base data. Key components include Spark Plugs, Filters, Turbos, and Axles that are added to the engines and equipment tracked by Power Systems Research.
Transcript
Welcome to the PSR PowerTALK podcast, produced by Power Systems Research.
00:06 Joe Delmont:
From Power Systems Research I’m Joe Delmont, editor of PSR PowerTALK. Today, we’re talking with Joe Zirnhelt about PSR’s database offerings and how clients use them to grow their markets.
This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Performance cookies are used to adjust the rate of analytic and advertisement tracking (if enabled) to avoid slowing our site down during high traffic times.
Cookies used to track your Internet use and tailor advertisements to your interests and provide the ability to share and like pages on our site with your friends on social media.
Functional cookies help to perform certain functionalities like sharing the content of the website on social media platforms, collect feedbacks, and other third-party features.