3,000 units is the estimate by Power Systems Research of the number of Crawlers expected to be produced in North America during 2026.

Crawler Dozers are heavy, driver-operated machines used for clearing and grading land. Usually, they have continuous treads and a broad hydraulic blade in front. Large crawler dozers normally have a set of claws called a ripper that is installed at the machine’s rear end and can crush hard rock.

A Crawler Loader is a piece of mobile construction equipment used to load materials; it’s used primarily in tough, off-road terrain. It’s similar to a wheel loader, except it has treads instead of wheels.

This product information comes from industry interviews and from two proprietary databases maintained by Power Systems Research: EnginLink , which provides information on engines, and OE Link, a database of equipment manufacturers.

Trends. In 2025, production of Crawlers in North America (US) decreased 9.7%, and production is expected to remain flat in 2026 with a nominal 1% drop.  The decline is attributed to losing production by Case along with the weakening in construction related activities that include supply chain issues.

High dealer inventory (mostly cost related) and slower demand for new equipment resulted in lower production.

Prior manufacturing increases were reduced with newer efficient models that make tasks more productive and safer. 2021-year declines were mostly due to COVID-19 related factors such as plant shutdowns, parts availability and lack of workforce.

The market also dropped significantly in the Spring of 2020 – 2021 caused by low oil prices along with a lull in mining and construction projects.   PSR

Carol Turner is Senior Analyst, Global Operations, for Power Systems Research

6,200 units is the estimate by Power Systems Research of the number of Aerators expected to be produced in North America during 2026.

Aerators are machines that have tines for soil penetration. The process involves perforating the soil with small holes to allow air, water and nutrients to penetrate the grass roots.

Engine-powered aerators are used to combat soil compaction in lawns and turf by creating holes (plugs or spikes) that allow air, water, and nutrients to penetrate deep down to the grass roots, leading to healthier, stronger growth, better drainage, and reduced thatch, essential for heavily trafficked areas or tough soils. These powerful machines make it feasible to aerate large areas efficiently, delivering benefits that surpass manual methods for serious lawn care or professional use. 

This product information comes from industry interviews and from two proprietary databases maintained by Power Systems Research: EnginLink , which provides information on engines, and OE Link, a database of equipment manufacturers.

Trends. In 2025, production of Aerators in North America decreased nearly 3%.  However, production is expected to gain 4% in 2026.  The gain is attributed to healthy lawn needs that include parks, residential, commercial/professional landscaping and sport fields. Expect production to increase by 10% by 2035.   PSR

Carol Turner is Senior Analyst, Global Operations, at Power Systems Research

274,253 units is the estimate by Power Systems Research of the number of Snowblowers expected to be produced in North America during 2026.

A Snow Blower or snow thrower is a machine for removing snow from an area such as a driveway, sidewalk, roadway, railroad track, ice rink, or runway. It can use either electric power (line power or battery), or a gasoline or diesel engine to throw snow to another location or into a truck to be hauled away.

Snow blowers range from the very small, capable of removing only a few inches (a few more cm) of light snow in an 18 to 20 in (457 to 508 mm) path, to the very large units, mounted on heavy-duty winter service vehicles and capable of moving 20-foot (6.10 m) wide swaths of heavy snow up to 6 feet (1.83 m) deep.

This product information comes from industry interviews and from two proprietary databases maintained by Power Systems Research: EnginLink , which provides information on engines, and OE Link, a database of equipment manufacturers.

Market Share. With 35.50% of total units produced, Ariens Company leads in the production of Snowblowers in NA (US only).  In second position is Stanley/MTD with 21%; third Toro with 15%.  

Exports: Collectively, up to 30% worldwide.

Trends. In 2025, production of snowblowers in North America decreased nearly 7%.  Production is expected to remain flat with a nominal increase of 65 units in 2026.  The 2025 decline is attributed to brands being discontinued along with the termination of unpopular models. The decrease also was driven by weak sales in previous seasons due to milder winters, high inventory and shift towards electric models.

Production of snowblowers typically starts in spring and summer, months before the first snowfall, making manufactures reliant on forecasting and inventory speculation.  Many models sell out if demand is higher than anticipated. 

Expect production to gain up to 5% over the next few years as branding issue settle and brand preference buying selecting other brands in the marketplace.  End users still like new innovative products that are more efficient than prior year models.  Two-stage units are extremely popular and are available in four basic grades: Economy, Residential/Homeowner, Heavy Duty/Landowner, or Professional. Consumers are always interested in more efficient units for snow removal and eco-friendly models currently in the market.

Battery & Corded Combined

2024: 11223

2025: 11868 (5.7% increase)

2026: 13372 (12.7% increase )

Battery only: (Stanley/MTD & Toro)  Note: Stanley/MTDhas one model

2024: 10136

2025: 10789 (6.4% increase)

2026: 12225 (13.3% increase)

Corded only: (Toro)

2024: 1087

2025: 1070 (1.5% decrease)

2026: 1147 (7.2% increase)

*Battery increases due to new models in production

*Corded decrease model not popular    PSR

Carol Turner is Senior Analyst, Global Operations, for Power Systems Research

80,800 units is the estimate by Power Systems Research of the number of Ag Tractors expected to be produced in North America (United States, Canada, and Mexico) during 2026.

This product information comes from industry interviews and from two proprietary databases maintained by Power Systems Research: EnginLink , which provides information on engines, and OE Link, a database of equipment manufacturers.

Ag Tractors are produced in several different types that were considered in the production of this report.

2-Wheel Drive Tractors are farm tractors that have a drive train that allows two wheels to receive power from the engine simultaneously. Normally, the rear axle is powered by the engine.

4WD Articulated Ag Tractors are farm tractors built with an articulated chassis very similar to the design used for articulated wheel loaders. Each element of the articulated chassis has a rigid drive axle, and the front and rear elements are connected by a pivoting/ articulating joint. This design uses rigid (i.e. non-steering) drive axles and is typically used for large, high-HP tractors.

MFWD Tractors (Mechanical Front Wheel Drive) are farm tractors which feature a rigid chassis with steerable front-drive axles. This designation applies to both full-time 4WD and front-assist-drive configuration tractors across a broad HP range. Both configurations are produced in significantly greater volume than the 4WD Articulated type tractors.

Tracked Ag Tractors are steerable multitrack tractors with powered rubber tracks instead of wheels to move the vehicle. The crawler-type tracks are flexible and reinforced with steel. They are usually powered by hydrostatic or completely hydraulic driving mechanisms. They can be articulated or nonarticulated.

Trends. In 2025, production of Ag Tractors in North America decreased 6.2%.  Production is expected to drop by nearly 6% in 2026. 

Prior declines in 2020 were attributed to COVID-19 related issues which included unusually high orders for materials and parts. Inventory levels are at the lowest level in decades and have left the supply chain a mess, according to leading tractor manufacturers and AEM. 

Production of machinery and components needed to build equipment has been halted.  This negatively affected demand for farm machinery and contributed to overall lower sales and profits for agricultural equipment operations.

New tractors have become very expensive and have weakened demand. Reduced demand also has been linked to lower commodity prices.

The peak of Ag Tractor production was in 2013.  Expect production to remain flat with a potential 10% decline by 2035.      PSR

Carol Turner is Senior Analyst, Global Operations, for Power Systems Research

1,300 units is the estimate by Power Systems Research of the number of Golf Cars expected to be produced in North America during 2026.

Dumpers/Tenders are vehicles designed for carrying bulk material, often on building sites. Dumpers are distinguished from dump trucks by configuration: a dumper is usually an open 4-wheeled vehicle with the load skip in front of the driver, while a dump truck has its cab in front of the load.

This product information comes from industry interviews and from two proprietary databases maintained by Power Systems Research: EnginLink , which provides information on engines, and OE Link, a database of equipment manufacturers.

Market Share. With 50% of total units produced, Country Home Products leads in production of Dumpers/Tenders in North America. In second position is Allen Engineering with 24%; third, Power Buggy (Indy) 13%. 

Export. 15% worldwide.  

Trends. In 2025, production of Dumpers/Tenders in NA increased 6.4%.  Expect production to gain 10% in 2026 over 2025.  The 2024 decline was due to saturation in the marketplace along with longevity of products in the field.  Also, utility style models are versatile and are extremely popular with homeowners. 

Dumper/Tenders are sought after pieces of equipment, much faster than a conventional wheelbarrow and they accelerate job site activities.  Expect production to increase an additional 5% by 2035.   PSR

Carol Turner is Senior Analyst, Global Operations, for Power Systems Research

60,100 units is the estimate by Power Systems Research of the number of Golf Cars expected to be produced in North America during 2025.

Golf Cars are small, motorized vehicles that transport golfers and their equipment around a golf course. They may also be used as a Neighborhood Electric Vehicle (NEV) to transport people within golfing communities or similar neighborhoods.

This product information comes from industry interviews and from two proprietary databases maintained by Power Systems Research: EnginLink , which provides information on engines, and OE Link, a database of equipment manufacturers. PSR

For details, download the complete report above.

Carol Turner is Senior Analyst, Global Operations, for Power Systems Research

9,500 units is the estimate by Power Systems Research of the number of Tractor/Loader/Backhoes expected to be produced in North America during 2025.

Tractor/Loader/Backhoes (TLBs) are full-size machines that are three pieces of construction equipment combined into one: the tractor, the loader and the backhoe. These units are designed to tackle an array of construction and agricultural related activities.

This product information comes from industry interviews and from two proprietary databases maintained by Power Systems Research: EnginLink , which provides information on engines, and OE Link, a database of equipment manufacturers. PSR

For details, download the complete report above.

4,600 units is the estimate by Power Systems Research of the number of Combines expected to be produced in North America during 2025.

A Combine is a farm machine that harvests grain crops. Combines can reap, thresh and winnow crops into a single process. Crops include wheat, oats, rye, barley, corn, etc.

This product information comes from industry interviews and from two proprietary databases maintained by Power Systems Research: EnginLink, which provides information on engines, and OE Link, a database of equipment manufacturers. PSR

For details, download the complete report above.

Carol Turner is Senior Analyst, Global Operations for Power Systems Research

481,000 units is the estimate by Power Systems Research of the number of Scooters expected to be produced in North America during 2025.

Scooters/Minibikes/Mopeds are motorized 2-wheeled vehicles used primarily for recreational.

This product information comes from industry interviews and from two proprietary databases maintained by Power Systems Research: EnginLink, which provides information on engines, and OE Link, a database of equipment manufacturers.    PSR

For details, download the complete report above.

Carol Turner is Senior Analyst, Global Operations for Power Systems Research

944,000 units is the estimate by Power Systems Research of the number of On-Road Motorcycles expected to be produced in North America (U.S. and Mexico) in 2025.

An On-Road Motorcycle or Street Bike is a motorized two-wheeled vehicle that is street legal for sport and leisure activities. Motorcycles in this segment include features such as headlights, brake lights and turn signals.

This product information comes from industry interviews and from two proprietary databases maintained by Power Systems Research: EnginLink , which provides information on engines, and OE Link, a database of equipment manufacturers.  PSR

For details, download the complete report above.

Carol Turner is Senior Analyst, Global Operations, for Power Systems Research